Ignition Systems for Special Effects

IGNITION SYSTEMS

ELECTRIC MATCH is also known as fusehead ignition. It is a hot wire bridge ignition system, an extremely reliable ignition system. This will operated on 1 volt, 10 milliamps. ATF Permit is required.

SE430

1-499: $1.80 Each

500 +: $1.70 Each

FUZE
Synonym: Fuse,

All fuse regardless of type, must be handled with care. All fuse, under the correct conditions, can be ignited by impact, friction, sparks or open flame. Store in a dry, well ventilated magazine. When cutting fuse, place away from other flammable materials. Do no carry fuse in your pocket. Cut with a single, sharp blade in one cut. Avoid sawing or shearing action. Friction created may ignite the cord. Do not hold.

MANTITOR FUSE IGNITOR CORD
Excellents for commercials. Burn rate is 1 to 13 seconds per fot. Wire cor for forming fuse burning patterns. Kitchen match ignition. Highly visible burst of flame as it burns. Diameter is 3/32". Spool is 100 meters (328 feet). ATF Permit is required.

SE710

Per foot: $.75

(1 to 3 spools): $195.00
Per Spool

(4 to 10 spools): $160.00
Per Spool

(20 + spools):
$130.00
Per Spool

FUSE
Green, waterproof fuse burns in or out of water. Commonly referred to as "Hobby Fuse" or "Cannon Fuse". Ignition by kitchen match, Nichrome (hot) wire or Electric Match. Approximate duration of burn is 30 seconds per foot. ATF Permit is required. MSDS

SE700

10 ft: $4.25

25 ft: $9.25

50 ft: $16.50

100 ft: $30.00

NICHROME IGNITERS are for ignition of flammable liquids and powders. Hand wound, 32 gauge wire, 4" long. Ignition source is a 12 volt lantern battery. Do not use a car battery.

SE325

Pkg of 12: $7.50

FIRING LINES. Two conductor, lightweight firing lines. Spade ends and alligator clip ends. 25 feet long. can be used for either Nichrome Igniter or Electric Match.

SE331

Per set: $10.00

BULK FIRING LINE is an inexpensive, 2 conductor line suitable for making your own firing line. Brown in color, 22 gauge wire, 1000 feet per spool.

SE334

Per spool: $83.50

NICHROME WIRE. A high grade nickel, chrome alloyed wire for ignition and heating purposes. To determine the proper gauge wire for a particular application use Ohms law as follows:
V divided by R per foot = AMPS
AMPS x V = Watts

Cat #	Gauge	Decimal Size	Resistance Per Foot	Ft. Per 1/4 lb. spool	Length Per Package	Package Price	Spool Price
W130	14	.064	.1648	22.10	5 ft.	$9.70	$21.25
W131	18	.040	.4219	56.5	5 ft.	$4.10	$21.75
W132	20	.032	.6582	88.10	5 ft.	$2.65	$22.25
W133	26	.0159	2.670	257.10	10 ft.	$1.70	$27.25
W134	33	.008	13.390	1798.20	25 ft.	$1.40	$39.00

TOP NEXT PAGE